Multi Cover Basic 100cm x 10m is a non-woven moisture and shock absorbent cover fleece for the temporary protection of all kinds of surfaces. Multi Cover Basic consists of two layers. The bottom layer is an anti-slip film which ensures that the drape always remains tightly attached. The soft top layer of the cover fleece consists of recycled textiles that have been compressed and thermally welded onto the bottom layer. The textile top layer provides good shock absorption and is moisture absorbent. Paint or other substances are thus absorbed and sucked up and do not penetrate the foil bottom layer.
Multi Cover Basic 100cm x 10m
€18.09 inc. VAT
Multicover Basic 100cm x 10m offers basic protection for covering various floors during painting activities.
- Additional information
- Processing instructions
- Reviews (0)
- Covering laminate
- Covering linoleum
- Covering of tiles
- Covering of concrete floor
- Coating of PVC floor
- Covering of external floor
- Shock absorbing
- Moisture absorbing
The floor to be protected must be complete, dry, clean and hardened before covering.
Remove the outer foil packaging. Place roll on floor and unroll by hand or foot. Overlap the seams. For heavy use, use Duct Tape to seal the seams. Check regularly for continued suitability.
As much as possible, bring the corners of a room together and then fold it like a bag.
Use only on existing floors
Our products are checked regularly. The technical information mentioned is offered on the basis of best knowledge, insight and practical experience. Deviations in the stated information may be caused by various environmental factors and deviations in the measuring equipment and methods used. The information stated is not binding as a specification and should be regarded as a guideline. Dutch Protect Flooring cannot provide any guarantee or warranty as to the suitability of this product for any particular application or use. When using this product, for whatever purpose, the responsibility of suitability rests with the user. The product should always be tested before use. Dutch Protect Flooring is not liable for damage and consequential loss in the broadest sense of the word resulting from the use of this product.
Suitable for all kinds of existing floors such as laminate, carpet, parquet, natural stone etc. Substrate must be completely clean, dry and cured. During use, regularly check for continued suitable application. Dutch Protect Flooring is not liable for damage and consequential loss in the broadest sense of the word resulting from the use of this product.