VB Floor Cover Protective Film M7 60cm x 60m is a super strong, light adhesive film for the temporary protection of floors and stairs. The transparent LLDPE film is provided with a specially designed water based adhesive for an optimal adhesion to hard surfaces.
VB Floor Cover Protective film M7 60cm x 60m
€29.15 exclusive of VAT
VB Floor Cover Protective Film M7 60cm x 60m is a super strong, light adhesive protective film for the temporary protection of floors and stairs.
- Covering laminate
- Covering of ceramic tiles / flagstones
- Covering linoleum
- Covering of marmoleum
- Covering PVC (provided with PU top layer)
- Quick and easy to us
- Super strong and tough material
- Stays in place without the use of tape
- Quick removal without glue residue
- Hand roller
Substrates must be dry, clean and fully cured.
Remove the outer foil packaging. Keep it. Then unroll a strip of approx. 10cm by hand. Lay the roll on the ground, rub the foil on and then unroll by hand or foot. When covering stairs, start at the top and cut with a knife at a bend if necessary.
When removing as much as possible, bring the corners of a room together and then fold as if in a bag.
If used on lacquered stairs, check the quality of the lacquer carefully. On older stairs, or if the varnish has been applied incorrectly, it may come off. If in doubt, use Multi Cover / Perfect Cover Premium.
Suitable for laminate, linoleum, ceramic tiles and wooden stairs. When covering wooden stairs please make sure that they are not treated with a varnish or paint, in that case choose the Multi Cover / Perfect Cover Premium. The surface to be protected should be completely dry, clean and hardened. Before and during use check regularly that it is still in good condition.