Carpet Cover M6 90cm x 60m 60mu is a strong, self-adhesive cover film for the temporary protection of carpet, carpet tiles and upholstered stairs. The product has an adhesive layer specially developed for adhesion to carpet and leaves no glue residue after removal. Easydek Carpet Cover is extremely resistant to intensive use thanks to its extremely strong material. Thanks to the adhesive layer the Easydek Carpet Cover always stays in place, creating a safe working and living environment. It is resistant to rolling traffic such as rolling scaffolds, carts and pump trucks.
- Additional information
- Processing instructions
- Reviews (0)
45 days (up to 40°C)
- Covering carpet
- Covering carpet tiles
- Covering upholstered stairs
- Quick and easy to us
- Safe for walking on thanks to self-adhesive underlayer
- Particularly thick material for intensive loads
- Hand roller
PROCESSING: The surface must be dry, clean and fully cured.
BEGINNING: remove the outer foil packaging. Keep it. Then unroll a strip of approx. 10cm by hand. Lay the roll on the ground, rub the film on and then unroll by hand or foot. When covering stairs, start at the top and cut with a knife at a bend if necessary.
REMOVE: When removing, bring the corners of a room together as far as possible and then fold as if in a bag.
CAUTION: In the case of newly laid carpet, do not cover until the carpet adhesives have cured. For carpet tiles the minimum drying time is generally 24 hours, for broadloom carpet at least 48 hours.
Our products are checked regularly. The technical information mentioned is offered on the basis of best knowledge, understanding and practical experience. Deviations in the listed information may be caused by various environmental factors and deviations in the measuring equipment and methods used. The information stated is not binding as a specification and should be regarded as a guideline. Dutch Protect Flooring cannot provide any guarantee or warranty as to the suitability of this product for any particular application or use. When using this product, for whatever purpose, the responsibility of suitability lies with the user. The product should always be tested before use. Dutch Protect Flooring is not liable for damage and consequential loss in the broadest sense of the word resulting from the use of this product.
Only suitable for textile substrates. The surface to be protected must be completely dry, clean and cured. Check regularly before and during use for continued suitable application.